What is the difference between LED bulbs and energy saving lamps?

Edison invented the light bulb to make people say goodbye to 'darkness' and walked into the light. The original light bulb is what we call incandescent lamps today. The effective utilization rate of electric energy by incandescent lamps is very low. About 10% of the electric energy is converted into light energy, and the rest of the electric energy is converted into heat energy and disappears into the air. With the advancement of the times, energy-saving lamps have been invented by people. Energy-saving lamps are easy to manufacture and cheap, and they are more energy-efficient and brighter than incandescent lamps. Therefore, they have gradually replaced incandescent lamps and once became the mainstream choice for indoor lighting. However, LED lights are an emerging lighting technology in recent years. LED lights are a technological advancement compared with energy-saving lamps. It can be said that LED is the development direction of future lighting lamps.
.
The main luminescent material for energy-saving lamps is still tungsten wire. The principle is that the tungsten wire generates electricity after being energized and heated, and uses certain technical means to accelerate the electron. The lamp of the energy-saving lamp is designed as a vacuum filled with mercury, ie mercury. The accelerated electrons interact with the vaporized mercury atoms to produce ultraviolet light. A fluorescent substance is applied to the energy-saving lamp tube, and ultraviolet light is irradiated onto the fluorescent substance to generate light.
LED is the abbreviation of LED. The main component of an LED lamp is a semiconductor that converts electrical energy into light energy. It is connected to the circuit board with silver wires or gold wires, and the surrounding user is sealed with epoxy resin to protect the whole body in the protective case. .
In addition to the principle of illumination, LED lamps and energy-saving lamps have very significant differences in environmental protection, energy saving, service life and stability. LEDs are more energy efficient than energy-saving lamps. The energy consumed by LEDs is 25 percent of energy-saving lamps. This is because ordinary energy-saving lamps still consume a portion of the electrical energy and convert it into heat. LED lamps do not have this problem. LED lamps have a longer service life, and quality LED bulbs can last for 10,000 to 20,000 hours, while the same energy-saving lamps have a service life of between 6,000 and 10,000 hours.
LED lights are more environmentally friendly. Mercury is one of the indispensable luminescent materials for energy-saving lamps. As the use time increases, the sealing performance of energy-saving lamps will be gap, and mercury will be volatilized into the air, causing pollution to the air. LED lights have no such problems at all, and they are safe and environmentally friendly. LED lights far exceed the energy-saving bulbs in terms of seismic and lightning protection. Continuous switches caused by voltage instability have far less impact on LED lights than energy-saving lamps. If the energy-saving lamps are frequently switched, the service life will be greatly reduced.
An important reason for the current LED blocking is that the price is generally too expensive. For ordinary users, the performances of service life, energy saving and environmental protection cannot be visually observed. Only the price can be intuitively felt. However, considering the advantages of the above LED lamps, the cost of installation is also acceptable. The service life is so long after all, and the stability is not easy to break. In the long run, it is definitely more cost-effective than buying energy-saving lamps.


These are summarized led lighting lighting network of small series, I hope you have a new understanding of the future LED light bulbs and energy-saving lamps!

KNLE1-63 TWO FUNCTION : MCB AND RCCB FUNCTIONS

leakage breaker is suitable for the leakage protection of the line of AC 50/60Hz, rated voltage single phase 240V, rated current up to 63A. When there is human electricity shock or if the leakage current of the line exceeds the prescribed value, it will automatically cut off the power within 0.1s to protect human safety and prevent the accident due to the current leakage. 
leakage breaker can protect against overload and short-circuit. It can be used to protect the line from being overloaded and short-circuited as wellas infrequent changeover of the line in normal situation. It complies with standard of IEC/EN61009-1 and GB16917.1.


KNLE1-63 Residual Current Circuit Breaker With Over Load Protection

KNLE1-63 Residual Current Circuit Breaker,Residual Current Circuit Breaker with Over Load Protection 1p,Residual Current Circuit Breaker with Over Load Protection 2p

Wenzhou Korlen Electric Appliances Co., Ltd. , https://www.korlen-electric.com