LED display installation method
Wall-mounted: The back of the screen is displayed against the wall and fixed to the wall. This method is a common method and is easier to implement.
Sitting upright: the display screen sits on the platform. This method is the easiest to implement, and this type of installation should be preferred when conditions permit.
Mosaic: The display is embedded in a wall frame. This method is rare. If the wall is not deep enough, it must be considered for maintainability.
Side-mounted: that is, the sides of the display screen are stressed, and the side is hung between the two buildings or columns. This method is often used for the screen suspension of the open space, and the two columns are built according to the suspension requirements of the screen.
2. Better performance in high contamination areas
3. Overall better handling of shock loads
4. More aesthetically pleasing the eye, and smaller profile
5. More resistant to vandalism and breakage due to the forgiving nature of polymer
6. Strong in tension
We warmly welcome friends both domestic and abroad to visit our company, if you have any questions, please contact with us directly.
Sitting upright: the display screen sits on the platform. This method is the easiest to implement, and this type of installation should be preferred when conditions permit.
Mosaic: The display is embedded in a wall frame. This method is rare. If the wall is not deep enough, it must be considered for maintainability.
Side-mounted: that is, the sides of the display screen are stressed, and the side is hung between the two buildings or columns. This method is often used for the screen suspension of the open space, and the two columns are built according to the suspension requirements of the screen.
Polymer Pin Insulator is applied to high voltage power line to support conductor and insulate from ground. Polymer Pin Type Insulator consists of a cylindrical solid insulating core that is subjected to mechanical loads and is protected by an elastomeric casing through which the load is transferred to the core. And Composite Pin Insulator is used under 35kV distribution line. Since this Pin Composite Suspension Insulator has many advantages, now days many countries and areas more and more use this type insulator to displace porcelain or ceramic insulator.
Features
1. Lighter in weight, almost a 90% weight reduction. This weight reduction leads to easier handling, reduced shipping and installation costs2. Better performance in high contamination areas
3. Overall better handling of shock loads
4. More aesthetically pleasing the eye, and smaller profile
5. More resistant to vandalism and breakage due to the forgiving nature of polymer
6. Strong in tension
| MAIN DIMENSIONS AND STANDARD PARTICULARS | |||
| Type | 11KV 10KN | 24KV 8KN | 33KV 10KN |
| Rated Voltage,KV | 11 | 24 | 33 |
| Rated mechanical strength load,KN | 10 | 8 | 10 |
| Creepage distance,mm | 300 | 770 | 900 |
| Structure height,mm | 210 | 312±15 | 375±15 |
| Insulating distance,mm | 142 | 215 | 307 |
| Lightning impulse withstand voltage,KV | 95 | 170 | 200 |
| 1 min wet power frequency withstand voltage,KV | 38 | 75 | 90 |
| Standard | IEC61952 | IEC61952 | IEC61952 |
We warmly welcome friends both domestic and abroad to visit our company, if you have any questions, please contact with us directly.
Pin Type Insulator,Composite Pin Insulator,Composite Polymer Pin Insulator,Pin Composite Suspension Insulator
FUZHOU SINGREE IMP.& EXP.CO.,LTD. , https://www.cninsulators.com