Customers throw a third party to identify more than 60% of Lehman's samples for inspection

On January 17, it was reported that the quality of Lehman Optoelectronics was questioned by the customer. Although the four customers strongly denounced, at the time the customer did not disclose the third-party appraisal, Lehman Optoelectronics also emphasized that the above appraisal was not seen.

However, after the “thunder”, the customer also started “raining”: According to the materials provided by the customer on January 21, the customer entrusted the country with the Lehman Optoelectronic model specification LS-DTEP-FEN2-025.0*5.0mm. The Semiconductor Device Quality Supervision and Inspection Center conducted inspections, and the inspection concluded that 37 of the 60 samples failed. Lehman Optoelectronics said that quality disputes can be resolved through negotiation or legal channels.

More than 60% of samples submitted for inspection failed

According to the materials issued by Li Xianghui, one of the four major customers of Lehman Optoelectronics, the customer refuted four issues including Lehman Optoelectronics alleging that the customer maliciously defaulted on the payment. One of the important contents is Lixiang. Huike commissioned the National Semiconductor Device Quality Supervision and Inspection Center to test the Lehman Optoelectronics model LS-DTEP-FEN2-025.0*5.0mm. The inspection report number is w2012-615(b) and the test conclusion is “this.” The second test product, according to the notarized certificate provided by the entrusting unit: (2012) relevant test conditions and user orders specified in the page 7of12 of the Shijiao National Character No. 1863, a total of 60 samples, 23 samples qualified, 37 samples failed. .

The data show that the National Semiconductor Device Quality Supervision and Inspection Center is administratively affiliated to the 13th Research Institute of China Electronics Technology Group Corporation. It is directly under the State Administration of Quality Supervision, Inspection and Quarantine and the Ministry of Information Industry and is managed by the National Certification and Accreditation Administration. The center was established in 1986 and is one of the first 100 state-level centers planned by the country. It has certain authority in the industry.

Previously, the customer who jointly claimed Lehman Optoelectronics had stated that it had a third-party appraisal, but it was not issued at the time, and Lehman Optoelectronics’ response was that it had never seen a third-party appraisal. Three-party identification has surfaced.

Company: Negotiable or legally resolved

The reporter contacted the National Semiconductor Device Quality Supervision and Inspection Center on the inspection report. The relevant person of the center told the reporter that Lixiang Huike had commissioned the center to inspect the relevant products. The time was about November last year and the inspection time was about 2 months. At that time, a total of three products were inspected. "The inspection report mainly shows how many samples are bad at the same time," said the above. However, what is the specific inspection project and what performance problems the product has, and the details are not known because the specific inspection personnel are not contacted.

"We don't want to fight." The responsible person of Lehman Optoelectronics told the reporter that the material released this time is a rebuttal against the falsehood in the clarification report of Lehman Optoelectronics. The material also contains the above key Third-party identification report.

Regarding the above actions and statements of customers, Lehman Optoelectronics Secretary said that if there is a third-party test report or a legal solution, the company will face, "quality disputes between the two parties can be resolved through negotiation or legal channels." .

The Secretary finally said, "The company's clarification announcement was very clear and true, and it will not be responded to this time."

High transparency Transparent Led Display with over 80% transparency makes the glass retained its perspective lighting performance. LED lamp is invisible from a so remote distance that would have no affected to see the around space near the glass or window video wall.Using special glue, the display will directly paste on the glass video wall, only 10 seconds to curdle, no structural changes required, convenient and efficient. LED lamps are recessed in the PCB board, on the one hand can protect the LED lamps, on the other hand will help to enhance the stability of LED lamps,prevent the lamps from LED damage.Cables hidden in the cabinet makes the whole LED Display looks neat and exquisite.Using special glue, the display will directly paste on the glass video wall, only 10 seconds to curdle, no structural changes required, convenient and efficient.Indoor maintenance, quick and safe,save manpower and material resources.Installing the glass LED display in the building can help not only saving a large part of the lighting lamps of external walls to save cost, but also making advertising income because of the more attraction of the Transparent LED Display.There is no need for conventional cooling systems and air-conditioning for transparent LED screens.

Transparent LED Display

Transparent Led Display,Transparent Glass Led Display,Transparent Led Screen,Transparent Display Screen

Shenzhen Bako Vision Technology Co., Ltd. , http://www.rentalleddisplays.com