Cubic boron nitride film lamp radiator

What is cubic boron nitride? The second hard artificial abrasive, second only to diamond, is widely used in superhard tools, heat sink materials, high temperature semiconductors, etc. Although it is a "second child", the future is immeasurable.
At the investment and financing conference held a few days ago, the cubic boron nitride film was taken out, so that you can use the diamond drill and the porcelain to live. If you apply a film, the knife can cut the iron. At the same time, it can also change the LED light. The heat energy is light energy, and a thin film can save several Three Gorges Dams.
Perhaps you don't know that although diamond is high in hardness, it is inherently fragile. Oxidation occurs at 500-700 degrees Celsius. When the temperature reaches 700 degrees Celsius, it will begin to dissolve in iron. So who can cut iron? Yang Hangsheng, the person in charge of Tianzhu Technology, told the reporter: "As long as you have a layer of cubic boron nitride film with high hardness and high temperature resistance on the outside of the tool." This tool life is 10 times higher than that of cemented carbide tools. 20 times ceramic tools. The cutting speed can be increased by 8 times compared with cemented carbide tools. The maximum temperature for maintaining cutting performance is also nearly 1000 degrees higher than that of high-speed steel, and dry cutting can be performed without cutting fluid within a certain range.
In addition to being plated outside the tool, cubic boron nitride can be plated on the outer layer of the LED lamp. The function is to help the thermal energy of the LED lamp to become light energy, bring the heat out of the chip, and avoid excessive heat damage to the chip material, which means that the heat dissipation problem of the LED can be fundamentally solved.
The ordinary incandescent lamps we usually use, only 20% of the energy is converted into light, and the remaining 80% is converted into heat. The global LED lighting application market is huge, and it is expected to reach 62.5 billion US dollars in 2014. Then our cubic boron nitride market can be said to be high and promising.
If one third of the country's street lights are replaced by LED lights, it can save a lot of power generation of the Three Gorges Dam. This part of the power generation is used in other fields, and it can add huge economic benefits.

Electronic Lock Motor product introduction:

Electronic Lock Motor, also known as Intelligent Lock Motor, Belong to small reducer series, the main structure composed of drive motor (motor) with a reduction gear box, composed of a shaft connection, form integrated motor reducer; Drive motor is purchasing product, reduction gear box is customized according to the project product demand, the maximum power under 10 w, maximum voltage up to 12 v, below 25 mm diameter size.


Functions: it is widely used in various intelligent locks, such as Shared bicycle lock, fingerprint lock, glass lock, safe lock, hotel lock, family lock, inductive smart lock, etc


Features:China Electronic Lock Motor is based on micro precision reducer development, small intelligent micro precision reducer can do 10 mm in diameter, is widely used in safe, locks, smart locks, sensor intelligent lock;

This kind of motor has the characteristics of low noise, low energy consumption, small volume, light quality, high precision, large torque and durability

Method of use: the best stable in horizontal plane, installed on the China Electronic Lock Motor output shaft parts, cannot use a hammer to knock, knock prone to press into the dc Electronic Lock Motor drive, may cause damage to internal components, and cannot be used in the case of blocked.

Lock motor

Operating temperature range:

Electronic Lock Motor should be used at a temperature of -10~60℃.

The figures stated in the catalog specifications are based on use at  ordinary room temperature catalog specifications re based on use at ordinary room temperature  (approximately20~25℃.

If a electronic Lock Motor is used outside the prescribed temperature range,the grease on the gearhead area will become unable to function normally and the motor will become unable to start.Depending on the temperature conditions ,it may be possible to deal with them by changing the grease of the motor's parts.Please feel free to consult with us about this.


Storage temperature range:

China Electronic Lock Motor should be stored ta a temperature of -15~65℃.

In case of storage outside this range,the grease on the gearhead area will become unable to function normally and the motor will become unable to start.


Service life:

The longevity of Electronic Lock Motor  is greatly affected by the load conditions , the mode of operation,the environment of use ,etc.Therefore,it is necessary to check the conditions under which the product will actually be used .The following conditions will have a negative effect on longevity.Please consult with us should any of them apply.



●Use with a load that exceeds the rated torque

●Frequent starting

●Momentary reversals of turning direction

●Impact loads

●Long-term continuous operation

●Forced turning using the output shaft

●Use in which the permitted overhang load or the permitted thrust load is exceeded

●A pulse drive ,e.g.,a short break,counter electromotive force,PWM control

●Use of a voltage that is nonstandard as regards the rated voltage

●Use outside the prescribed temperature or relative-humidity range,or in a special environment.

●Please consult with us about these or any other conditions of use that may apply,so that we can be sure that you select the most appropriate model.


when it come to volume production,we're a major player as well .each month,we rurn out  600000 units,all of which are compliant with the rohs directive.Have any questions or special needed, please contact us, we have the engineer group and best sales department to service to you

Looking forward to your inquiry. Welcome to our factory.

Lock motor

Electronic Lock Motor

Electronic Lock Motor,Motor For Electronic Lock,Electronic Lock Dc Motor,Electronic Lock High Speed Motor

Shenzhen Shunchang Motor Co., LTD. , https://www.scgearmotor.com