LED electronic display installation hardware steps
Many people find it difficult to get started when they first come into contact with LED electronic display screens. They haven't found a correct installation method after groping for a long time. Sometimes, even if they find the installation method of LED electronic display screen, they can't let go. Therefore, the following summarizes the installation steps of full-color LED display.
LED electronic display installation hardware steps:
1. Insert the DVI display card into the AGP socket of the motherboard, and then set the driver;
2. Insert the data card into the PDI socket on the motherboard (this is for users with data cards);
3. Link the two controls DVI and AGP installed above;
4 Connect the control line to the serial port Rs232;
5 Connect to the receiving card with a network cable; the specific number is based on the engineering drawings;
6 Check the connection is correct, you can set or power on debugging.
Full-color LED display software device
The installation method is as follows:
1. Video card driver installation
Insert the video card driver CD into the optical drive, you can automatically enter the device state, please follow the prompts;
Install DirectX8.1 first and then install the driver; finally install the control panel.
2. Play software
Large-screen dedicated broadcast and setting software LED studio, or other control software;
Insert the application software CD provided with the screen into the CD-ROM drive, copy or install all the sequences to the computer.
3. After the debugging is completed, the LED electronic display is successfully installed!
Other considerations:
Check whether the wiring method is correct, including the connection of the strong current part (the weak current part has been tested in the production enterprise), the signal connection is correct, mainly for the system input card output and output direction is correct, there are directions on the receiving card.
Whether the system connection is correct (please refer to the system connection instructions)
Whether the installation of the computer software is completed, including the settings of the graphics card (please refer to the instructions for setting the graphics card) and the control software installation.
Precautions
1. Observe the operation steps in the "User Manual";
2. Moisture-proof, humidity requirements: at the highest working temperature, the LED display should be less than 92% relative humidity
3. Appropriate temperature, temperature requirement: working environment temperature -20 ° C≤t≤80 ° C
Storage temperature-40 ° C≤t≤60 ° C
4. The power supply must meet the requirements
LED display power supply voltage: 220V ± 10% frequency: 50HZ ± 5%
Safe and reliable earth contact, reliable isolation of the ground wire and the neutral wire, access to the power source away from high-power electrical equipment.
The Iphone 6S Battery uses the imported high quality IC chips with original seal,from the storage of the cell to the output, it breaks through the shortage of the previous chip conversion rate of 99% and comprehensively upgrades the conversion rate to 99.9%.Our Mobile Phone Battery is designed of double fuse to prevent short circuit,automatic short circuit recovering with the memory metal fuse.
Five security makes the cellphone more competitive:1)Strong power storage 2)Quick charge 3)Durable upgrade 4)safe using 5)High efficiency.
Iphone 6S Battery,Apple 6S Battery,Iphone 6S External Battery,Apple Iphone 6S Battery
Shenzhen Hequanqingnuo Electronic Technology Co., Ltd. , https://www.hqqnbattery.com