Flat-panel speaker bass and its distortion test analysis 1, high frequency : no matter what sound, its high frequency, intermediate frequency, low frequency is directly related to the quality of this audio quality. Generally, traditional speakers are composed of more than three speakers, which are divided into high frequency speakers, medium frequency speakers, and low frequency speakers. High-frequency speakers are the most difficult to do, requiring materials and technology to be very particular. Generally, the high frequency of the conventional audio is up to 20KHz, but it is difficult to distinguish the human ear at 16KHz. For a more professional person, the high frequency is good or bad, it sounds very obvious. The high-frequency sound of the speaker sound is completely different. The high frequency does not go, many high-frequency sounds. The reaction does not come out, that is to say, the sound will change. Like the singer, the high height is not going to be troublesome! An audio lover has said this: "I can endure everything in the world, I can't stand the box that can't be treble!" As an acoustic electroacoustic senior engineer, putting "high frequency up" has always been an ideal struggle. Because it is not so simple to make the high frequency of the sound, that is, the box goes up, the amplifier does not support, nor does it work! The amplifier is also involved in electronic engineers. Only the best electronics plus the best electro-acoustic can make the best sound!
The high-pitched part of the flat-panel sound, since the birth, the high-pitched sound has never been done, generally around 16KHz, to 18KHz high-frequency distortion is obviously large. Our company has made great efforts in the design of the drive, the soundboard, the bonding materials, the connecting materials and the cabinet. The "a new type of flat-panel audio drive" that was researched at the end of 2005 has been granted a national patent. Its main technology is to increase the high magnetic and elastic waves under the condition of constant weight and thickness, so that its magnetic force is strong, the amplitude is increased, and our new aluminum honeycomb panel (good rigidity, light weight, sound transmission) Good combination of special bonding technology (strong bonding, no deformation after a long time, shedding, cracks and high temperature resistance), coupled with a very reasonable box design, so that it is normal and smooth pronunciation. In March 2006, our company designed and researched the flat-panel speakers, and the frequency response range detected by the Shenzhen Electronic Product Quality Testing Center (National Laboratory) was 90Hz-25KHz (without distortion). (The high frequency reaches 25KHz, which is an amazing parameter for the flat panel speaker. Because the highest range of electroacoustic equipment of Shenzhen Electronic Product Testing Center is 20KHz, it is finally completed with the electroacoustic testing equipment of Konka Group.)
2, low frequency and its distortion : the bass of the flat panel speakers are not good, it is a wide understanding of the community! Indeed it is! However, after listening to it in my company's specialty stores, it is not the case, I feel very good! what is the reason?
Most people think this way: the bass of the flat-panel speaker is done, and the flat-panel sound is successful! Therefore, many people have worked hard on the bass of the flat-panel speakers, and unwittingly entered a misunderstanding: while the bass is properly lowered, the distortion will increase several times, and the high-pitched part will also drop at the same time! The result is to lose one! This is the conclusion that our company has repeatedly tested through the latest electro-acoustic equipment. So, how to solve the problem that the flat speaker does not have a good bass? The best way is to make up for it with a subwoofer! However, if you directly make up the straight-through bass, you will enter a misunderstanding: the bass of the flat-panel speaker is thin, the subwoofer makes up for it, and the mid-range sound or the fault appears in the subwoofer. To be just right, it is very difficult to do it by ordinary crossovers. Moreover, the bass effects of different music requirements are different. Our traditional enthusiasts usually have several sets of boxes at home. They are listening to different music and listening to different boxes. The home theater has a good box. Not necessarily suitable for listening to CD music!
With the development of audio technology to this day, it is not so troublesome. Digital audio has gradually simplified the complexity of the past. Our company has absorbed the world's most advanced audio technology in the field of audio and digital, and newly developed the DVD digital tablet home theater (DVD digital pure power amplifier machine), eliminating the complicated capacitors, resistors and ring cattle circuits in the past. The computer program design, each function uses a highly integrated IC to make effective digital compensation for the subwoofer and the flat panel speaker, so that various discs can be automatically recognized, and the program can be upgraded according to the increase of the disc type! No need for complicated professional debugging when playing various discs! Not to worry about the bass problem of the flat-panel audio, you can easily hear the digital music of the summit! Flat-panel speaker bass and its distortion test analysis 1, high frequency : no matter what sound, its high frequency, intermediate frequency, low frequency is directly related to the quality of this audio quality. Generally, traditional speakers are composed of more than three speakers, which are divided into high frequency speakers, medium frequency speakers, and low frequency speakers. High-frequency speakers are the most difficult to do, requiring materials and technology to be very particular. Generally, the high frequency of the conventional audio is up to 20KHz, but it is difficult to distinguish the human ear at 16KHz. For a more professional person, the high frequency is good or bad, it sounds very obvious. The high-frequency sound of the speaker sound is completely different. The high frequency does not go, many high-frequency sounds. The reaction does not come out, that is to say, the sound will change. Like the singer, the high height is not going to be troublesome! An audio lover has said this: "I can endure everything in the world, I can't stand the box that can't be treble!" As an acoustic electroacoustic senior engineer, putting "high frequency up" has always been an ideal struggle. Because it is not so simple to make the high frequency of the sound, that is, the box goes up, the amplifier does not support, nor does it work! The amplifier is also involved in electronic engineers. Only the best electronics plus the best electro-acoustic can make the best sound!
The high-pitched part of the flat-panel sound, since the birth, the high-pitched sound has never been done, generally around 16KHz, to 18KHz high-frequency distortion is obviously large. Our company has made great efforts in the design of the drive, the soundboard, the bonding materials, the connecting materials and the cabinet. The "a new type of flat-panel audio drive" that was researched at the end of 2005 has been granted a national patent. Its main technology is to increase the high magnetic and elastic waves under the condition of constant weight and thickness, so that its magnetic force is strong, the amplitude is increased, and our new aluminum honeycomb panel (good rigidity, light weight, sound transmission) Good combination of special bonding technology (strong bonding, no deformation after a long time, shedding, cracks and high temperature resistance), coupled with a very reasonable box design, so that it is normal and smooth pronunciation. In March 2006, our company designed and researched the flat-panel speakers, and the frequency response range detected by the Shenzhen Electronic Product Quality Testing Center (National Laboratory) was 90Hz-25KHz (without distortion). (The high frequency reaches 25KHz, which is an amazing parameter for the flat panel speaker. Because the highest range of electroacoustic equipment of Shenzhen Electronic Product Testing Center is 20KHz, it is finally completed with the electroacoustic testing equipment of Konka Group.)
2, low frequency and its distortion : the bass of the flat panel speakers are not good, it is a wide understanding of the community! Indeed it is! However, after listening to it in my company's specialty stores, it is not the case, I feel very good! what is the reason?
Most people think this way: the bass of the flat-panel speaker is done, and the flat-panel sound is successful! Therefore, many people have worked hard on the bass of the flat-panel speakers, and unwittingly entered a misunderstanding: while the bass is properly lowered, the distortion will increase several times, and the high-pitched part will also drop at the same time! The result is to lose one! This is the conclusion that our company has repeatedly tested through the latest electro-acoustic equipment. So, how to solve the problem that the flat speaker does not have a good bass? The best way is to make up for it with a subwoofer! However, if you directly make up the straight-through bass, you will enter a misunderstanding: the bass of the flat-panel speaker is thin, the subwoofer makes up for it, and the mid-range sound or the fault appears in the subwoofer. To be just right, it is very difficult to do it by ordinary crossovers. Moreover, the bass effects of different music requirements are different. Our traditional enthusiasts usually have several sets of boxes at home. They are listening to different music and listening to different boxes. The home theater has a good box. Not necessarily suitable for listening to CD music!
With the development of audio technology to this day, it is not so troublesome. Digital audio has gradually simplified the complexity of the past. Our company has absorbed the world's most advanced audio technology in the field of audio and digital, and newly developed the DVD digital tablet home theater (DVD digital pure power amplifier machine), eliminating the complicated capacitors, resistors and ring cattle circuits in the past. The computer program design, each function uses a highly integrated IC to make effective digital compensation for the subwoofer and the flat panel speaker, so that various discs can be automatically recognized, and the program can be upgraded according to the increase of the disc type! No need for complicated professional debugging when playing various discs! Not to worry about the bass problem of the flat-panel audio, you can easily hear the digital music of the summit! Flat-panel speaker bass and its distortion test analysis 1, high frequency : no matter what sound, its high frequency, intermediate frequency, low frequency is directly related to the quality of this audio quality. Generally, traditional speakers are composed of more than three speakers, which are divided into high frequency speakers, medium frequency speakers, and low frequency speakers. High-frequency speakers are the most difficult to do, requiring materials and technology to be very particular. Generally, the high frequency of the conventional audio is up to 20KHz, but it is difficult to distinguish the human ear at 16KHz. For a more professional person, the high frequency is good or bad, it sounds very obvious. The high-frequency sound of the speaker sound is completely different. The high frequency does not go, many high-frequency sounds. The reaction does not come out, that is to say, the sound will change. Like the singer, the high height is not going to be troublesome! An audio lover has said this: "I can endure everything in the world, I can't stand the box that can't be treble!" As an acoustic electroacoustic senior engineer, putting "high frequency up" has always been an ideal struggle. Because it is not so simple to make the high frequency of the sound, that is, the box goes up, the amplifier does not support, nor does it work! The amplifier is also involved in electronic engineers. Only the best electronics plus the best electro-acoustic can make the best sound!
The high-pitched part of the flat-panel sound, since the birth, the high-pitched sound has never been done, generally around 16KHz, to 18KHz high-frequency distortion is obviously large. Our company has made great efforts in the design of the drive, the soundboard, the bonding materials, the connecting materials and the cabinet. The "a new type of flat-panel audio drive" that was researched at the end of 2005 has been granted a national patent. Its main technology is to increase the high magnetic and elastic waves under the condition of constant weight and thickness, so that its magnetic force is strong, the amplitude is increased, and our new aluminum honeycomb panel (good rigidity, light weight, sound transmission) Good combination of special bonding technology (strong bonding, no deformation after a long time, shedding, cracks and high temperature resistance), coupled with a very reasonable box design, so that it is normal and smooth pronunciation. In March 2006, our company designed and researched the flat-panel speakers, and the frequency response range detected by the Shenzhen Electronic Product Quality Testing Center (National Laboratory) was 90Hz-25KHz (without distortion). (The high frequency reaches 25KHz, which is an amazing parameter for the flat panel speaker. Because the highest range of electroacoustic equipment of Shenzhen Electronic Product Testing Center is 20KHz, it is finally completed with the electroacoustic testing equipment of Konka Group.)
2, low frequency and its distortion : the bass of the flat panel speakers are not good, it is a wide understanding of the community! Indeed it is! However, after listening to it in my company's specialty stores, it is not the case, I feel very good! what is the reason?
Most people think this way: the bass of the flat-panel speaker is done, and the flat-panel sound is successful! Therefore, many people have worked hard on the bass of the flat-panel speakers, and unwittingly entered a misunderstanding: while the bass is properly lowered, the distortion will increase several times, and the high-pitched part will also drop at the same time! The result is to lose one! This is the conclusion that our company has repeatedly tested through the latest electro-acoustic equipment. So, how to solve the problem that the flat speaker does not have a good bass? The best way is to make up for it with a subwoofer! However, if you directly make up the straight-through bass, you will enter a misunderstanding: the bass of the flat-panel speaker is thin, the subwoofer makes up for it, and the mid-range sound or the fault appears in the subwoofer. To be just right, it is very difficult to do it by ordinary crossovers. Moreover, the bass effects of different music requirements are different. Our traditional enthusiasts usually have several sets of boxes at home. They are listening to different music and listening to different boxes. The home theater has a good box. Not necessarily suitable for listening to CD music!
With the development of audio technology to this day, it is not so troublesome. Digital audio has gradually simplified the complexity of the past. Our company has absorbed the world's most advanced audio technology in the field of audio and digital, and newly developed the DVD digital tablet home theater (DVD digital pure power amplifier machine), eliminating the complicated capacitors, resistors and ring cattle circuits in the past. The computer program design, each function uses a highly integrated IC to make effective digital compensation for the subwoofer and the flat panel speaker, so that various discs can be automatically recognized, and the program can be upgraded according to the increase of the disc type! No need for complicated professional debugging when playing various discs! Not to worry about the bass problem of the flat-panel audio, you can easily hear the digital music of the summit!
Li-Ion Battery Charger
Battery Charger,Cell Li-Ion Battery Charger,Storage Battery Charger
Laptop Adapters Wall Mount Adapter Co.,Ltd , http://www.chlaptopadapters.com