As the main component of the soft start control cabinet, the soft starter plays a very important role in the soft start control cabinet. The soft start control cabinet controls various power devices through soft starters in conjunction with control switches, contactors, and the like. The soft start control cabinet is very versatile and can be used in the control of different electrical equipment. The table below shows a typical application reference table for soft starters.
The soft starter is a kind of electrical equipment, which has certain requirements for the environment, installation and use of the soft starter, so that the soft starter in the soft start control cabinet can achieve the best performance when working.
1. Installation requirements:
The soft starter must be disposed of. In order to facilitate heat dissipation, the soft starter has sufficient air circulation above and below. It is recommended to install it on the metal plate. If it is installed in the control box, make sure that the control box has a vent to facilitate air circulation.
2. Installation environment:
Do not install the soft starter in direct sunlight or near a heat source. Install it in dust-free, non-corrosive gas, oil-free, non-flammable gas, dripping water, etc. If the opposite sex is to be installed in such an environment, It can be seen that the soft starter is installed in a control box/cabinet that can be used as a sundries.

AC Power Meter
The AC power meters are applicable to the measurement of single-phase or three-phase
voltage and current parameters of distribution system. The transformation ratio of this series of meters is programmable. They supports digital input, relay output, analog output and communication functions. They provide a variety of different installation sizes and can directly replace the analog pointer ammeter.
Ac Power Meter,Led 3 Phase Current Panel Meter,Ac Digital Electric Power Meter,Ac Multifunction Meter
Jiangsu Sfere Electric Co., Ltd , https://www.elecnova-global.com