2009 series of lighting standard specifications introduced the specification industry
GB/T5700-2008 "Lighting Measurement Method" drafted by China Academy of Building Research, China National Institute of Standardization, etc., which was published on 2008-07-16, published on 2008-12-25, and implemented on 2009-01-01 It is under the jurisdiction of the National Human Ergonomics Standardization Technical Committee.
The CISPR15 version 7.2 standard was released in January 2009:
CISPR 15 Limits and methods of measurement of radiodisturbance characteristics of el ectrical lighting and similarequipment "Restrictions and Measurement Methods for Radio Disturbance Characteristics of Electrical Lighting and Similar Equipment", version 7.2, was published in January 2009.
The IEC61347-2-10 version 1.1 standard was released in January 2009:
IEC61347-2-10 Lamp controlgear - Part 2-10: Particular requirements for electronic invertors and convertors for high-frequency operation of cold start tubular discharge lamps (neon tubes) The special requirements for electronic converters and frequency converters for gas discharge lamps (neon), version 1.1, was published in January 2009.
The IEC61000-3-2-am2 version 3.0 standard was released in February 2009:
IEC61000-3-2 Amendment 2 - Electromagnetic compatibility (EMC)- Part 3-2: Limits - Limits for harmonic current emissions (equipment input current ≤ 16 A per phase) Electromagnetic compatibility Part 3-2: Limit harmonic currents The emission limit (device input current per phase ≤ 16A)" Modification 2 version 3.0 standard, was released in February 2009.
JGJ/T163-2008 "Design Specification for Urban Night Lighting" was implemented on May 1, 2009:
The Ministry of Housing and Urban-Rural Development of the People's Republic of China issued Announcement No. 141 on November 4, 2008: The industry standard JGJ/T163-2008 "Design Specification for Urban Night Lighting" was implemented on May 1, 2009.
JGJ/T119-2008 "Building Lighting Terminology Standards" was implemented on June 1, 2009:
The Ministry of Housing and Urban-Rural Development of the People's Republic of China issued Announcement No. 144 on November 13, 2008: Construction Engineering Industry Standard JGJ/T119-2008 "Building Lighting Terminology Standards" was implemented on June 1, 2009. The original JGJ/T119-98 "Building Lighting Terminology Standard" was also abolished at the same time.
GB/T16275-2008 "Urban Rail Transit Lighting" 2009-06-01 Implementation:
GB/T16275-2008 "Urban Rail Transit Lighting", revised from 2008-12-23, implemented from 2009-06-01. The original GB/T16275-1996 was abolished at the same time.
GB2797-2008 "General Technical Conditions for Lamps" from 2010-01-01:
GB2797-2008 "General Technical Conditions for Lamps", approved by 2008-12-15, implemented from 2010-01-01. The original GB2797-1994 was abolished at the same time.
GB16895.30-2008 "Electrical installations of buildings - Part 7-715: Special low-voltage lighting installations for special installations or places" from 2010-02-01
GB16895.30-2008 "Building Electrical Installations Part 7-715: Special Low Voltage Lighting Installations for Special Installations or Locations", approved by 2008-12-15, implemented from 2010-02-01.
1. Structure Design:
(1) Pure flat structure, ergonomically design, slim & good appearance, streamlines modeling, exquisite work-craft.
(2) Display, touch, PC system integration slim design;47.9mm thickness only.
2. Effect:
(1) Using the newly developed projected capacitive screen, supports 10 point touch, handwriting and multi-point gesture;
(2) Touch speed is less than 3ms, good accuracy, ease of use and easy to maintain;
(3) Anti-light interference, to ensure the accuracy of operation (can be used as usual under bright light);
3. Good scalability: Flexible configuration, can expand the installation of customer demand for a variety of functional accessories;
4. High safety: Aluminum alloy + sheet metal structure, no sharp edges, wear resistant and anti-corrosive paint process, overall explosion-proof design;
5. Stable performance: advanced design ideas, strict production process, stable and reliable product quality, low failure rate;
6. Simple installation: power a key switch, dispense with on-site installation and commissioning.
Industrial Panel Pc,Industrial Touch Pc,Embedded Pc,Touch Panel Computer
Guangzhou TouchWo Electronics Co.,Ltd. , http://www.touchaio.com